What is the cause of the air pressure failure of the permanent magnet air compressor

 

The cause of the air pressure failure of the permanent magnet air compressor:

 

1. The barometer is faulty.

 

2. The transmission belt between the air compressor and the engine is too loose and slippery, or the pipeline between the air compressor and the air tank is cracked or the joint is leaking.

 

3. There are too many sediments in the oil-water separator (using the principle of gravity sedimentation), pipes or air filters (effect: filtering impurities, etc.) and cannot be blocked.

 

4. The air compressor exhaust valve is not tightly sealed, the spring is too soft or cracked, the air compressor cylinder head bolts (composition: head and screw) are loose, sand holes and cylinder head gaskets burst and leak air.

 

5. The cylinder liner and piston ring of the air compressor are worn (a basic type of component failure), and even air leakage. The reliability and functionality of the two-stage compression screw air compressor ensures that the operating costs of the compressor remain extremely low throughout its lifetime.

 

6. Check and adjust whether the installation direction of the unloading valve is consistent with the direction of the symbol (arrow).

 

Sollant Group-Professional Compressed Gas Solutions Provider